AMDR-60 Rail type switch power:
|
Type |
Technicalindicators |
|||
|
Output |
DC voltage |
12V |
24V |
48V |
|
|
Rated current |
7.5A |
4A |
2A |
|
|
Rated power |
90W |
96W |
96W |
|
|
Ripple and noise ① |
<120mV |
<150mV |
<200mV |
|
|
Voltageprecision |
±1% |
±1% |
±1% |
|
|
Voltage regulationrange |
±10% |
||
|
|
Loadregulation rate |
±1% |
±1% |
±1% |
|
|
Linear adjustment rate |
±1% |
||
|
Input |
Voltage range/frequency |
85-264VAC 47Hz～63Hz (120VDC～370VDC) |
||
|
|
Efficiency (typical) ② |
＞83% |
＞86% |
＞87% |
|
|
Power factor |
PF≥0.95/230VAC PF≥0.98/115VAC(full load) |
||
|
|
Working current |
＜1.3A 110VAC ＜0.8A 220VAC |
||
|
|
Shock current |
110VAC 35A，220VAC 70A |
||
|
|
Start up time |
3000ms、50ms、20ms:110VAC 3000ms、50ms、50msms:220VAC |
||
|
Protect |
Overload protection |
105%-150% type: protection mode: burp mode automatic recovery after the abnormal condition is lifted |
||
|
|
Overvoltage protection |
Output voltage is 135%,close the output. When the abnormal condition is lifted, it will resume automatically |
||
|
|
Over temperature protection |
>85℃when close the output temperature drop after power supply recovery after restart |
||
|
Environmental |
Working temperature and humidity |
-20℃～+70℃; 20%~90RH |
||
|
|
Storage temperature and humidity |
-40℃~+85℃; 10%~95RH |
||
|
Security |
Pressure resistance |
Input output：3KVAC Input-case：1.5 KVAC Output-case:0.5 KVAC lasted for 1 minute |
||
|
|
Isolation resistance |
Input-output and input-shell,output-shell:500VDC /100MΩ |
||
|
Other |
Size |
55*90*100mm |
||
|
|
Net Weight/Gross weight |
420/450g |
||
|
Remarks |
①Measurement of ripple and noise：Using a 12”twisted-pair line with a capacitor of 0.1uF and47uF in parallel at the terminal, the measurement is carried out at 20MHz bandwidth. ②Efficiency is tested at the input voltage of 230VAC,rated load and 25℃ambient temperature. Accuracy: including setting error, linear adjustment rate and load adjustment rate. Test method of linear adjustment rate：testing from low voltage to high voltage at rated loadadjustment rate test method: from 0%~100% rated load. The start-up time is measured in the cold start state, and the fast frequent switch machine may increase the startup time. When the altitude is above 2000 meters, the operating temperature should be lowered by 5℃/1000 meters. |
|||
